Ridged Mount (SR) Forklift Blade
The standard forklift blade was actually the first blade we ever built to move snow in front of our buildings here at Hotwood's in Grand Island, NE.
Our standard ridged mount forklift blades come in four sizes, 52’’, 65’’, 72’’, and 96’’. Call for shipping quotes.
SR-52 shown mounted on the forklift above.
-
Our standard blades are a ridged mounted unit that will work on your forklift exactly like the spring loaded model with the exception they do not have the springs mounted on each side of the blade that lets it roll over and spring back if you hit something solid.
This blade is perfect for the person who is not worried about needing that spring action option—someone who has a huge concrete apron without curbing.
This blade will mount the same way all our blades mount: by running your fork teeth into the channel iron that protrudes off the rear of the blade, and then tightening the 4 set bolts in place on the top of the channel iron mounts. Mounting or dismounting this blade takes less than 2 minutes.
-
– All-Steel Construction
– Ridged Mount (No Springs for Trip Action, Does Not Angle from Side to Side)
– Replaceable Bit on Blade
– Heavy-Duty Channel Iron Fork Pockets (*Must Know the Width of your Fork Teeth When Ordering)
– Heavy-Duty Blade Stiffeners Located on Back Side of Blade
– Adjustable Height Shoe Skids on End of Each Blade (Saves Wear on Blade Bit)
– Tie-Off and Lift Hooks (for safety, you should always connect a chain between the fork mast and the hooks on the blade to keep it from ever sliding off.)
– Premium Black Paint (Galvanized Coating is an Option. Call for Pricing).
– Unit Delivered Completely Assembled and Ready to Use
– Ships on a Pallet (Truck Freight Only)
-
*Pricing does not include shipping
Ridged Mount SR-52 Forklift Blade (52") $1,200.00
Ridged Mount SR-65 Forklift Blade (65") $1,300.00
Ridged Mount SR-72 Forklift Blade (72") $1,375.00
Ridged Mount SR-96 Forklift Blade (96") $2,300.00
*Hotwood's will email you a measurement sheet to fill out during the process of ordering to assure you get the right fit on your fork teeth, width of teeth, and spread on forks.
Mounting your forklift blade is very easy, as you simply slide the blade on to your fork teeth and tighten the 4 set screw bolts on the teeth.
Note: The photo above does not show outside skid shoes. (SKID SHOES ARE STANDARD ON ALL UNITS WE MANUFACTURE).
SR-96 Ridged Mount Blade palletized and ready to ship. This is how you will receive any size blade you order. Simply cut the banding and unit is ready to mount on your forklift.
SR 52, 65, & 72 Blades ready to ship out.
As you can see from this SR-96 that has not been through cleanup or painting, we do not skimp on quality when it comes to the structural strength of each and every blade we manufacture.