Trailer Replacement Parts
Dual Axle Trailer Replacement Fenders
Are you tired of the tin foil fenders on most trailers that not only fall apart with time but rust and vibrate apart?
Our replacement fenders made of 12 gauge diamond plate steel are your go-to fix!
Our single 12 gauge diamond plate fender shown above without the inner fender well. The same fender in the photo below is shown with our 12 gauge smooth fender well.
Note: We also offer these fenders in 11 gauge smooth steel as well.
-
Our Dual Axle Trailer Replacement Fenders are made of 12 gauge diamond plate steel or 11 gauge smooth steel. These fenders are tough enough to weld tie downs on the top of and also walk on when working around the load. Usually in stock at Hotwood’s, ready to ship or pick up. We do not weld the corners or break points to make fitting to your trailer easier when mounting. Always fit completely with inner well before welding in place as some trailers are not 100% straight and may need a little adjusting to make sure new fender fits correctly.
-
– Fender Measurements: 74 ¾” Long x 17 ½” Tall x 9 ¾” Wide O.D.
– Smooth Well Measurements: 72 ¼” Long x 14 ½” Tall
– Comes as Raw Steel for Easier Welding
– Can Be Picked Up in Grand Island, NE, or Shipped via Truck Freight
-
*Pricing does not include shipping
Diamond Plate (Non-Painted Raw Steel):
One 12 Gauge Fender (includes 1 Fender & 1 Well) $185.00
Two 12 Gauge Fenders (includes 2 Fenders & 2 Wells) $370.00
Smooth Steel (Non-Painted Raw Steel):
One 11 Gauge Fender (includes 1 Fender & 1 Well) $199.00
Two 11 Gauge Fenders (includes 2 Fenders & 2 Wells) $398.00
You will spend 6-7 hours making your trailer look like this with paint and fenders to frame brace between the wheels, but we guarantee that you will be very happy with the quality and the end results.
As you can see in the photo, we added a fender to frame brace between the wheels for added support. On this trailer we used 1” square tube for that brace. Doing this will help structurally, especially if you add a tie down on the top of the fender as shown above.
If your fenders look like the ones above and you want to go from rusty light gauge junk to mounted in place, primed and ready to paint 12 gauge diamond plate steel fenders in a few hours that will last years, you need to give us a call and see what we can do for you.
Portable Rub Rail Steps
Ladder shown above locked in hanging position for transport mode. Lynchpins keep handle stored in transport mode.
Ladder shown above in operating position. Handle can be shifted into upright position once lynchpins are removed.
One of the lynchpins shown in locked position for transport mode.
-
Hotwoods designed these ladders years ago out of necessity, and have been making them to help farmers, truck drivers and anyone who needs to get off and on a trailer to be able to do it much safer and easier than crawling on and jumping off like we have for years. As we all get older it gets much easier to understand how important it is to save an accident from happening while making our daily routine easier.
-
– 24 inches long
– 14 ½ inches wide
– 1 ½ square inch tubing
– Steps are 12 inches apart
-
Portable Rub Rail Steps _________________________$199.99
(Pricing does not include shipping)
UPS Shippable
Made in the USA
Truck & Trailer Hook Points
How many times do you go to strap your load down and you do not have hook points where you need them? Here at Hotwood’s, we have designed hook points that you can bolt or weld anywhere. Manufactured from 3/8” steel, these hook points offer quality and durability that lasts for years on your truck or trailer.
4 Point Strap Hook
-
This 3/8” steel hook point can be added anywhere you need a hook point on a truck or trailer. It was designed to be used with a 3” flat rub rail style hook, a two-prong finger style hook as shown on the left, or an ATV style hook shown on the right. The two holes in the flat area accept ½” bolts or these can be welded on any surface you desire.
*All hook points come in raw steel to make welding easier if that is how you decide to use them.
-
– Manufactured From 3/8’’ Steel
– Can Either Be Mounted with Two ½” Bolts or Welded On
– Shipped in Raw Steel Form to Make Welding Much Easier
– Quantity Orders are No Problem (Trailer Dealers & Welding Shops Welcome)
– UPS Shippable
-
*Pricing does not include shipping
4 Point Strap Hook $14.50
1–2 Point Strap Hook
-
1–2 Point Strap Hook was designed to be used more as an ATV style hook point, as it only has one hook point. However, you can bolt or weld it down through the single side and have 2 points to strap to, making it a 2 point hook.
*All hook points come in raw steel to make welding easier if that is how you decide to use them.
-
– Manufactured From 3/8’’ Steel
– All Holes are 1/2” in Size
– Can Either Be Mounted with Two ½” Bolts or Welded On
– Ships in Raw Steel Form to Make Welding Much Easier
-
*Pricing does not include shipping
1–2 Point Strap Hook $12.00
Weld-On Flat Strap Anchor Points
-
Tired of not having a place to hook your straps around the fender area on dual axle trailers? Here at Hotwood’s, we have designed a 3/8” weld-on rail with strap pockets to hook your straps through.
-
– Manufactured with 3/8” Steel
– Ships Raw for Easier Welding
– Size Ranges from 12” Long with 2 Strap Slots to 36” Long with 5 Strap Slots
– Comes with Multiple Gussets to be Welded in Place by Customer as shown in photo below.
– Can be Mounted at Any Location You Need Tie Downs on Your Trailer
– Designed to Be Used with 2 ½” Wide Flat Hooks; However, Many Style Hooks Will Work
-
*Pricing does not include shipping
Weld-On Flat Strap Anchor Points:
12” Long 2 Slot $24.50
20” Long 3 Slot $31.50
30” Long 4 Slot $39.50
36” Long 5 Slot $46.50
Do you have a trailer that needs old wood replaced on the floor?
We supply planking for many types of floors from trailers like this one in the photos on the right to stage floors to bleachers at ball fields.
Bottom photo shows a contractors siding platform he rebuilt using our planking.
We offer 2 sizes from 9 1/2” x 1 3/4” to 11 3/4” x 1 3/4”.
There is not a better way to upgrade your trailer floor or any surface like this than with aluminum planking. It’s light weight, quick, easy and performs for years.
Call for pricing and sizes you need us to quote.
Aluminum Plank
