DOCKS | WALKWAYS | STAIRS | RAMPS
Are you installing a new dock or updating an old, weathered, or damaged dock? Check out Hotwood’s all-aluminum floating docks that will last for generations.
Click on any of the photos below to learn more!
It's time to replace your dock with a quality floating dock system from Hotwood’s.
612 Dock System
816 Dock System
Walk-N-Dock System
Wheelchair Ramps
Anywhere Stairs
Modular Aluminum Steps & Landings
Why Choose Aluminum Over Wood Docks?
Wood docks produce not only mean slivers but also sagging boards that could possibly give way when a person is entering or exiting the dock.
One of the biggest problems we see every day in this business is dry rot in wood. You may ask, what exactly is dry rot? It occurs when the wood dries out on the underside of the plank, leaving the top side looking perfectly fine. Once the rot has penetrated the wood on the bottom side, it is only a matter of time before someone will break through the dock and fall in the lake and injure themselves. This is especially dangerous for the elderly, who may not notice a bad spot in the wood before it is too late.
Adding an aluminum dock adds to the value of your property, versus the wood dock that is forever needing maintenance as the years go by. With Hotwood's aluminum dock system, you are making an investment that will last a lifetime.
Checkout our Dock Testimonials page to see the quality and customer satisfaction for yourself!
↓ ↓ ↓
Universal Galvanized Dock Pipe Sleeve
Shown on a Hotwood’s aluminum dock.
Hotwood’s is now manufacturing dock pipe sleeves that mount to the end or any side of your dock. As these are universal, you can use square-headed bolts to mount them on any type of dock that you can bolt to.
Unlike any pipe sleeves seen before, we designed these with the bolt heads offset from the slide of the pipe to eliminate any rubbing or wedging of the sleeve on the post as it moves up or down.
The mounting bracket is manufactured from ¼’’ steel with schedule 40 - 3’’ ID pipe welded and then galvanized to last for life times. The bolt holes in the mounting plate are designed to be used with ½” bolts. There are no right or left sides as they will fit either way.
The mounting bracket measures 12” tall 4” wide with 2 slotted holes to accept ½” bolts. All corners are rounded to insure less chances of injury from the product.
If you are a dock builder, this is the pipe sleeve you want. As dock builders for over 30 years, we know what is needed and not just what sells.
UPS Shippable
$26.95 each (not including shipping)
Ask about our Custom-Built Dock Walkways
We can custom build walkways to your specific needs!
We manufacture custom walkways for customers who either need a new setup or need to replace an existing walkway. Our walkways can be adapted to any dock system new or old. The custom unit above is 6’ wide by 24’ long.
Shown above is a 3’ x 16’ all-aluminum walkway designed for one of our customers. Standard lengths are 8’, 12’, and 16’. Custom lengths can be made as well as custom attachments to dock and shorelines.
The dock above was designed and manufactured for the State of Nebraska. It is completely aluminum with a 12’’ heavy-duty I-beam substructure.
Manufactured completely from aluminum, this is the type of dock that lasts lifetimes with very little maintenance. Hotwood's welcomes all State and Federal agencies in need of any size dock or walkway.
This is another dock Hotwood's manufactured for the State of Nebraska that measures 20’ x 30’ with a 10’ x 20’ walkway.
-
*Pricing does not include shipping
8’ Aluminum Walkway x 36” Wide $2,125.00
12’ Aluminum Walkway x 36” Wide $2,600.00
16’ Aluminum Walkway x 36” Wide $3,175.00
When it comes to custom sizes, Hotwood's will take the time and energy it takes to satisfy your needs, large or small, private or public.
We installed this walkway with concrete steps going down to a customer’s existing dock. Walkway has a roller kit installed on the dock end to move up and down with water fluctuations.
Tired of worrying about your dock or boat lift when the lake freezes over?
You need the Ice Eater sold and serviced by Hotwood’s!
You can lower these Ice Eaters in the water, plug them in, and forget about them. As a Hotwood’s customer, you do not need to wonder what spring will bring.
Do-It-Yourself Wooden Walkway Kit
This kit includes:
ONE Aluminum welded end cap (shore end, shown next to bolts on left)
ONE Aluminum 3’’ x 3’’ angle dock mount with pivot point mounts (shown on top of poly float). With this bracket you can lag the walkway into almost any style of dock you have. You will need to drill holes in this bracket and purchase bolts to mount it to your dock. If mounting to a Shoremaster float, you will not need this bracket. The existing mounting brackets are made to bolt to the float from Hotwood's or any Shoremaster dealer.
ONE aluminum welded connection cap with pivot points to bolt to your dock bracket (on floor next to poly float)
TWO stainless steel bolts with nuts and washers (pivot point connectors)
TEN stainless steel bolts with nuts and washers to bolt your caps on your wood
Kit does not include any lumber (must be supplied by the customer)
-
This walkway kit is designed to let the customer supply their own 2’’ x 10’’ treated boards and cut them the exact length needed to fit a new dock or replace an existing worn or weathered walkway.
The walkway measures 4’ wide and can be any length you cut your 2’’ x 10’’ boards.
Requires five 2’’ x 10’’ treated wood planks to give you a 4’ wide walkway (Must be supplied by customer)
You will receive all the aluminum parts and hardware to build the walkway shown above, except the wood.
This walkway can be adapted to almost any dock you have, wood, poly, or aluminum. This universal kit is made to save you time and money, giving you years of performance.
-
*Pricing does not include shipping
Do-It-Yourself Wooden Walkway CALL FOR PRICING