WIRE WINDERS
With multiple designs and 40 years of experience, we offer a range of wire winder models that will fit your needs, from the farmer to the largest utility company.
Always in stock and ready to ship from parts for repairs, extra reels or complete units.
Click the button below to locate your nearest wire winder dealer.
HYDRAULIC 3-POINT
GAS WIRE WINDER
WIRE WINDER PARTS & ACCESSORIES
POLY ELECTRIC FENCE WINDER
HEAVY DUTY WINDER
HIGH TENSILE WINDER
UNIVERSAL WINDER
MAGNUM WINDER
BALE BED WINDER
Electric Fence Post Driver-Puller
In position to pull your post out
-
This patented electric fence post driver-puller cuts installing and removing small fence posts time in half. This tool is a must-have for anyone handling electric fencing using the 3/8” or 7/16” rebar steel posts. Powder coated bright red.
Easy to use, store, and operate, as it is lightweight and takes the possibilities of hitting your hand with a hammer while driving these smaller posts in (like we have all done in the past) impossible.
Manufactured in the USA of heavy duty steel, these tools are made to last a lifetime.
-
*Pricing does not include UPS shipping $45.00
Ready to drive your post in
Wire Dawg Wire Winder
Designed to roll 1 to 5 wires at a time for 1/2 mile. Perfect for cleanup or scrapping old wire. Manufactured from heavy duty steel in the USA.
-
Designed to to roll multiple or single strands at once, this winder’s main function is to be used to clean up old fences that you are not saving.
Connect to the output shaft or your posthole digger, lower the unit to the ground pushing the shaft in the ground for stability, tie your wires, and roll.
-
Unit mounts on post hole digger output shaft up to 2 9/16”. Opening of shaft mount is 2 5/8”. Adaptors are available.
To release wire you will loosen the black spinner knob shown on left. This takes tension from inside roll of wire.
That will let wire fall off the reel. Reset before starting new roll.
-
Price: $895.00
Ships via UPS. Can be picked up in Grand Island, Nebraska.
Fencing Tools
-
The Bullnose Moore Maker brand fencing pliers are the most reliable fencing pliers on the market. These pliers can easily cut barbed wire and smooth wire. They are the type of fencing pliers used on most of the major ranches in the world. Guaranteed for one year but designed to last a lifetime.
-
– Lightly Chrome-Plated Heavy Steel Construction
– Hammer Head and Wire Cutter on Both Sides
– Staple Puller in the Head
– Specifically Designed for Cutting Heavy Barbed Wire
– Plier Grip in the Jaw
– Weight: 1 lb.
– Length: 10 ½’’
– Proudly made in the USA
-
*Pricing does not include shipping
Bullnose Fencing Plier $68.00
Bullnose Fencing Pliers
Spike Fencing Pliers
-
The Spike Nose Fencing Pliers have a spike on one side and a bullnose on the other. They can be used to hammer nails or staples in or cut most types of wire. This is one of those tools you will not want to be without when fencing or doing many tasks around the farm or ranch. You will find these pliers to be very comfortable to handle and extremely well balanced.
-
– Lightly Chrome-Plated Heavy Steel Construction
– Hammer Head and Wire Cutter on Both Sides
– Staple Puller in the Head, plus NEW spiked head
– Specifically Designed for Cutting Heavy Barbed Wire
– Weight: 1 lb.
– Length: 10 ½’’
– Proudly made in the USA
-
*Pricing does not include shipping
Spike Fencing Pliers $70.00
-
Moore Maker patented Tee-Post Tie Bar cuts wire tying time in half. This tool is used to tie wire clips onto tee- posts. Simply insert end of clip into open end and twist bar around the post. Spiked end for untying clips from posts.
7’’ model for barbed or single strand wire.
-
*Pricing does not include shipping
Tee-Post Tie Bar $26.00
Tee-Post Tie Bar
Small Roll #9 Wire
-
How many farmers and ranchers have a tangled pile of #9 wire in the back of their truck? It started out as a nice and tight 36’’ roll, but what happened? After untangling everything I ever needed in the back of the pickup when I was growing up on the farm, I decided it was time to offer a small roll of life-saver #9 wire that can be put in any toolbox, or even under the seat in your truck.
-
– Usable Wire Per Roll: 63’
– Weight Per Roll: 4lbs.
– Extremely Handy and Easy to Use
-
*Pricing does not include shipping
#9 Wire 4lbs. Roll $22.00
Gas-Powered Post Driver with 1 ¾’’ I.D. Master Chuck
-
– Drives in Multiple Soil Types and Tough or Frozen Ground
– Safer than Hammers
– Easy to Transport (only 35 lbs, fully fueled)
– No Additional Equipment Needed
– Equipped with Rhino’s CIS™ Vibration Dampening and Padded Grip for Handling Comfort
– Made in the U.S.A.
-
– 1 ¾″ I.D. Master Chuck (Drives T Posts, 1″ To 1 5/8″ Round Pipe, 1 ¾″ Round Posts, & 1″ Square Posts)
– Honda GX35 4-Stroke Gas Engine
– 1″ Adapter with Lock Pin
– Driver Only Dimensions: 11’’ W x 14’’ D x 24’’ H
– 1720 BPM
-
*Pricing does not include shipping
Gas-Powered Post Driver w/ 1 ¾’’ I.D. Master Chuck- Call for current pricing
Gas-Powered Post Driver with 2 ½’’ I.D. Master Chuck
-
– Drives Posts for Many Types of Fencing, including Erosion Control, Agricultural, Containment, Municipal, and Residential
– Lightweight and Easy to Transport
– Compact and Light Enough for Use by One Installer. Fits into Areas with Limited Access and Maneuverability
– No Additional Equipment Needed
– Equipped with Rhino’s CIS Vibration Dampening and Padded Grip for Handling Comfort
– Made in the U.S.A. of Durable, Quality Materials
– Lifetime Impact Warranty
-
– The 2 ½″ Chuck Can Drive Round Posts up to 2 3/8″. The 2″ Chuck Sleeve Drives T-Posts and Smaller Round Posts
– Honda GX35 4-Stroke Gas Engine
– Includes: 2″ Adapter With Chuck-Lok System & Chuck Lok Locking Nut
– Driver Only Dimensions: 11’’ W x 14’’ D x 24’’ H
– Driver Weight: 37.8 lbs.
– 1720 BPM
-
*Pricing does not include shipping
Gas-Powered Post Driver w/ 2 ½’’ I.D. Master Chuck- Call for current pricing
Click comparison chart to enlarge
As you can see in this video, we have customers that use these daily, like this electrician who uses it to drive copper ground rods in place.
Wire-Ups
-
Wire-Ups solve the problem of crossing fences alone or with others, freeing up your hands to easily move people and gear through an obstacle without damaging the fence in the process.
Safe, effective, and simple to use, Wire-Ups make navigating barbed wire and other multi-strand fences a breeze. Find Wire-Ups at a store near you or purchase on-line today.
Wire-Ups are 100% Made in America from state of the art, non-conductive, glass filed nylon providing unsurpassed strength in a compact and lightweight package. Sold in pairs, Wire-Ups can easily be stored in automotive glove compartments, center consoles, backpacks, belt pouches or pockets.
Always respect private property, posting, restrictions and boundaries. Remove Wire-Ups immediately after crossing the fence. Unload firearms before passing through or over the fence. Use caution when crossing an electric fence. All fences pose potential risk to personal safety and/or equipment damage. Cross fences at your own risk. User assumes all responsibility.
-
*Pricing does not include shipping
Wire-Up $9.95
REPAIRS & PARTS
Here at Hotwoods we manufactured the first wire winder that was sold in 1986 and we manufactured the last order that just got shipped out or picked up. There has never been anyone else that made our wire winders.
So, if you need repairs like this customer with his 30 year old unit, we can fix or send any part to you for any winder we have ever made, no matter how old it is.
Contact Hotwoods in Grand Island Nebraska, directly for any repairs or parts you may need for your Hotwoods-Protatch Wire Winder. Most all parts are in stock and ready to ship.